![background image](http://html2.mh-extra.com/html/quantum/qx-series/qx-series_setup-manual_3502442212.webp)
Chapter 8: Electrostatic Discharge
Grounding Methods to Prevent ESD
QX and QXS Setup Guide
197
Grounding Methods to Prevent ESD
Several methods are used for grounding. Adhere to the following precautions when handling or installing
electrostatic-sensitive parts.
Caution:
Parts can be damaged by ESD. Use proper anti-static protection:
l
Keep the replacement FRU in the ESD bag until needed; and when removing a FRU from the chassis,
immediately place it in the ESD bag and anti-static packaging.
l
Wear an ESD wrist strap connected by a ground cord to a grounded workstation or unpainted surface of
the computer chassis. Wrist straps are flexible straps with a minimum of 1 megohm (± 10 percent)
resistance in the ground cords. To provide proper ground, wear the strap snug against the skin.
l
If an ESD wrist strap is unavailable, touch an unpainted surface of the chassis before handling the
component.
l
Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on both feet when
standing on conductive floors or dissipating floor mats.
l
Use conductive field service tools.
l
Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have an authorized reseller install
the part. For more information on static electricity or assistance with product installation, contact an
authorized reseller.