![background image](http://html1.mh-extra.com/html/quantum/lto-5-hh-sas-c/lto-5-hh-sas-c_technical-reference-manual_3541232034.webp)
Chapter 3: Installation
Configure the Tape Drive to a Server/Host
28
Quantum LTO-5 HH SAS Model C User’s Guide
Configure the Tape Drive to a Server/Host
1
Power-on the unit.
2
To configure the tape drive, refer to the documentation for your
server/host and application software.
Updating Firmware
Caution:
When updating firmware, do not power-off the drive until
the update is complete, or the firmware may be lost.
It is the customer's responsibility to ensure that this drive has the latest
firmware. Periodically check for updated levels of drive firmware by
visiting the web at
www.quantum.com/serviceandsupport
. Update drive
firmware using:
• The host interface
• The xTalk tool
• A firmware update (FUP) tape cartridge
For instructions on obtaining a new firmware image, visit
www.quantum.com/serviceandsupport
. To update the firmware, refer to
the following sections.
Updating Firmware
through the Host
Interface
Use xTalk software to update your drive firmware. Refer to the xTalk
User’s Guide for more details.
Summary of Contents for LTO-5 HH SAS C
