![background image](http://html1.mh-extra.com/html/quantum/lto-5-hh-sas-c/lto-5-hh-sas-c_technical-reference-manual_3541232010.webp)
Chapter 1: Preface
Tape Drive AC Grounding Inspection
4
Quantum LTO-5 HH SAS Model C User’s Guide
7
Check the cover of the tape drive for sharp edges, damage, or
alterations that expose its internal parts.
8
Check the cover of the tape drive for proper fit. It should be in place
and secure.
9
Check the product label on the tape drive to make sure that it
matches the voltage at your outlet.
Tape Drive AC Grounding Inspection
1
Power off the drive.
2
Disconnect all cables.
3
See
on page 4 which is provided for reference only.
Disconnect the power cord from its source.
4
Inspect the power cable for visible cracks, wear, or damage.
Figure 1 AC grounding
diagram (50 Hz and 60 Hz)
Summary of Contents for LTO-5 HH SAS C
