![background image](http://html1.mh-extra.com/html/quantum/dxi6900/dxi6900_field-service-manual_3777791145.webp)
Chapter 3: FRU Removal and Replacement Procedures
Replacing the Node System Board
Quantum DXi6900 G2 Field Service Manual
132
You will need the following items to perform this procedure:
l
Replacement system board kit provided by Quantum Customer Support.
l
#2 Phillips screwdriver
l
ESD grounding wrist strap (included in the replacement kit)
Illustration
Description
Replacement system board
Replacing the System Board
This section describes how to remove and replace the system board in the DXi6900 G2 Node. The system
board hosts numerous components, including the processors, integrated storage controller, network
daughter card, expansion card risers, and cooling fan assembly.
Caution:
Use appropriate ESD precautions, including the use of a grounding strap, when performing
this procedure.
Removing and replacing the hard drive backplane in the Node includes the following steps:
l
Removing a Failed System Board below
l
Installing a Replacement System Board on page 135
l
Updating the Service Tag and Setting the OEM ID on page 136
l
Verifying iDRAC Settings on page 137
Removing a Failed System Board
To remove the system board from the DXi6900 G2 Node:
Turning Off the DXi6900 G2 on page 23
).
Opening and Closing the Node on page 64
).
3. Remove the following components:
Replacing a Node Power Supply on page 79
).
Removing and Installing the Cooling Fan Assembly on page 179
).