![background image](http://html1.mh-extra.com/html/quantum/dxi6900/dxi6900_field-service-manual_3777791199.webp)
Chapter 3: FRU Removal and Replacement Procedures
Additional Removal and Replacement Procedures
Quantum DXi6900 G2 Field Service Manual
186
Item
Description
2
Control panel board
3
Control panel connector cable
4
USB connector cable
5
Screw
6
vFlash cable
4. Locate and press the tabs on the information tag (see
).
5. Push the information tag out of the slot to remove it from the control panel.
Figure 127:
Removing and Installing the Information Tag
EST
1
2
3
Item
Description
1
Information tag
2
Tabs
3
Slot
Replacing the Information Tag
To replace the information tag:
1. Replace the information tag from the failed Node chassis in the control panel in the new Node chassis.
To do this, push the information tag into the control panel slot (see
).
2. Connect all the applicable cables to the control panel (see
Figure 126 on the previous page
).
3. Insert the control panel into the slot in the chassis and secure the module with the screws.