![background image](http://html1.mh-extra.com/html/quantum/dxi2500-d/dxi2500-d_manual_3791090158.webp)
Quantum DXi-Series Command Line Interface (CLI) Guide
6-66538-03 Rev C
November 2010
158
Other System Configuration CLI Commands
E4001 Option
--debuglevel has invalid value!
E4002
Option --sleepatleast has invalid value!
E4003
Option --sleepatleast requires a value!
E4004 Option
--primary_pid requires a value!
E4005
Failed to determine node ID of this node (check /hurricane/node)
E4006
Option --onnode is not supported on single node system!
E4007
Option --onnode requires a value!
E4008
Option --onnode has a wrong value!
E4009
Error code not found! Must update libCommonUtil.so,
libCommonApi.so, or other shared libraries that use syscli error
codes!
E110001 NAS features are not licensed!
E110002 VTL features are not licensed!
E110003 OST features are not licensed!
E110004 PTT features are not licensed!
E110005 NDMP PTT features are not licensed!
E110006 Dedup features are not licensed!
E110007 Replication features are not licensed!
E110008 Capacity features are not licensed!
E120001 "Unable to load Seer
E130001 Missing
decimal
point in IPv4 address
E130002 Missing decimal value in IPv4 address
E130003 Invalid characters in IPv4 address
E130004 The decimal value in IPv4 address is out of range
E130005 The IPv6 address is invalid
E130006 The IP address is too long
E130007 The IP address is too short
E130008 The IPv6 address has too many colons
E130009 The IPv6 address has no colons
E130010 The IPv6 address has invalid characters
E130011 The IPv6 address has too many hexadecimal digits
E130012 The IPv6 address has too many double colons
E130013 The IPv6 bitcount/NetId is not a decimal value
E130014 The IPv6 bitcount/NetId is out of range
E130015 IP Address has invalid format
E130016 Cannot derive hostname from IP Address
E140001 Emailaddress entered is empty.