Quantum DXi2500-D, Manual

Page: 147 / 162

Quantum DXi-Series Command Line Interface (CLI) Guide
6-66538-03 Rev C
November 2010
Other System Configuration CLI Commands 147
[License = 4]
License Name = Replication
Installed = Yes
Date Installed = 2009
-
06
-
03 08:59:17
License Description = Enables Replication
[License = 5]
License Name = Storage Capacity
Installed = Yes
Date Installed = 2009
-
06
-
01 15:32:24
License Description = Limit Storage Capacity
[License = 6]
License Name = OST
Installed = No
Date Installed = ‐‐ Not Installed ‐‐
License Description = Limit Open Storage Server Connections
[License = 7]
License Name = Vision
Installed = No
Date Installed = ‐‐ Not Installed ‐‐
License Description = Enable Advanced Reporting
Adding a License
syscli --add license --key <license_key>
This CLI command allows the CLI admin to add a license on the system. You
need to provide a key corresponding to the license.
Note: For DXi2500-D and DXi4500 systems, all available licenses are
pre-installed at the factory. There is no need to add licenses to these
systems.
Diagnostic Logs
Generating a Diagnostic Log
syscli --gen diaglog [--system] | [--array] [--quiet] [--lastgen]
This CLI command allows the admin user to generate diagnostic logs on the
system.
• system: generates the system diagnostic log. This is the default if no
diagnostic type is specified.
• array: generates the raid array diagnostic log