![background image](http://html1.mh-extra.com/html/quantum/dxi2500-d/dxi2500-d_manual_3791090155.webp)
Quantum DXi-Series Command Line Interface (CLI) Guide
6-66538-03 Rev C
November 2010
Other System Configuration CLI Commands
155
E0006
Command executed successfully by noded but failed to read output
E0007
Command failed when executed by noded.
E0008
Command succeeded when executed by noded.
E0010 Programmer's
development error (must not be seen in production
code)
E0011
Allocated buffer is too small.
E0012
Allocated buffer is too small.
E0021
Input data is in error
E0022
Input data is in valid
E0023 Input
parameter(s) is in error
E0024
Input argument(s) is in error
E0100 Command:
unsupported (unrecognized)
E0101
Command: this command is not implemented yet
E0102 Command:
subcommand
is unsupported (unrecognized
subcommand).
E0103 Command:
subcommand is not implemented yet.
E0104
Command: option is invalid or not supported.
E0105
Command: support for this option is not implemented yet
E0106
Command: data validation is not implemented yet
E0107
Command: do-function is not implemented yet
E0108
Command is not specified.
E0109
One or more required options are missing.
E0110
Option is incompatible with another option specified earlier.
E0120
Option required a value but the value was not specified.
E0121
Option does not have a value
E0122
Option has invalid value
E0123
Command cannot be in file
E0130
Two or more mutually exclusive options are specified!
E0131
Must specify one of the mutually exclusive options!
E0132 Command
was
cancelled
successfully as requested!
E0133
Command was not sent to noded!
E0134
Request was submitted. The result may take a few minutes.
E0140
The function is not implemented yet.
E0500
Must specify filename after "--file" option.
E0551
The command option file is not found.
E0552
Cannot access the command option file.
E0553
The command option file is empty.