Quantum DXi-Series Command Line Interface (CLI) Guide
6-66538-03 Rev C
November 2010
Other System Configuration CLI Commands
127
[Recipient
=
1]
Name
=
User1
Address
=
Notification
Type
=
all
Adding E
-
Mail Recipients
syscli --add emailrecipient --name <recipient_name> --emailaddr
<recipient_email_address> [--type { high | highmed | all } ] [--disable]
This CLI command allows the CLI admin to add an Email recipient. If the
--disable
option is specified, the recipient’s email notification is disabled.
Editing E
-
Mail Recipients
syscli --edit emailrecipient --name <recipient_name> [--emailaddr
<recipient_email_address>] [--type { high | highmed | all } ] [--disable]
This CLI command allows the CLI admin to edit an existing Email recipient. Note
that at least the Email address, type or the disable optional parameter must be
specified.
Deleting E
-
Mail Recipients
syscli --del emailrecipient --name <recipient_name>
This CLI command allows the CLI admin to delete the specified Email recipient.
Deleting All E
-
Mail Recipients
syscli --deleteall emailrecipient [--sure]
This CLI command allows the CLI admin to delete all Email recipients. If the
--sure
option is specified, you will not be prompted for confirmation.
Outgoing E
-
mail Server
CLI Commands
The following e
-
mail server CLI commands are supported:
•
Displaying the Outgoing Email Server
•
Setting the Outgoing Email Server
•
Deleting the Outgoing Email Server
Displaying the Outgoing Email Server
syscli --get emailserver
This CLI command allows the CLI admin to display the outgoing Email server. An
example output of Outgoing Email Server is shown below.
Outgoing
Server
Host
name
or
IP
address
=
10.40.164.50