![background image](http://html1.mh-extra.com/html/quantum/dxi2500-d/dxi2500-d_manual_3791090014.webp)
Quantum DXi-Series Command Line Interface (CLI) Guide
6-66538-03 Rev C
November 2010
14
VTL Configuration CLI Commands
model
=
DXi8500
drivemodel
=
QUANTUMDLTS4
drives
=
2
media
=
2
slots
=
12
serial
=
123456XYZ
dedup
=
enabled
backupwindow
=
disabled
end
Listing Available Library
Models
syscli --list library
This CLI command allows the CLI admin to display a list of the available library
models. Specific library model or product ID is required when adding or creating
a new partition.
An example output of three supported library models is shown below:
library
count
=
3
library
=
1
productid
=
DL1500
description
=
EMC
Disk
Library
library
=
2
productid
=
Scalar
100
description
=
ADIC
Scalar
100
library
=
3
productid
=
Scalar
i2000
description
=
ADIC
Scalar
i2000
end
Listing of Supported
Tape Drive
syscli --list drive
This CLI command allows the CLI admin to display a list of the available virtual
tape drive models. A specific virtual tape drive model is required when adding or
creating a new partition.
An example output of two tape drive is shown below:
tapedrive
count
=
2
tapedrive
=
1
model
=
QUANTUMDLTS4
description
=
Quantum
DLT
S4