Quantum DXi-Series Command Line Interface (CLI) Guide
6-66538-03 Rev C
November 2010
72
Replication CLI Commands
•
Pausing the Replication Service on the Source
•
Resuming the Replication Service on the Source
•
Enable All Replication for Both VTL and NAS on the Source
•
Disable All Replication for Both VTL and NAS on the Source
•
Clearing Replication Statistics
•
Listing Deduplicated VTL on the Source
•
Listing Deduplicated NAS on the Source
•
Listing Replicated VTL on the Target
•
Listing a Replicated NAS Share on the Target
•
•
Recovering a NAS Share on the Target
•
Failback VTL To the Source from the Target System
•
Failback a NAS Share on the Target
•
Deleting a Replicated VTL from the Target
•
Deleting a NAS Share on the Target
•
Listing the Replicated VTL Recovery Jobs on the Target
•
Listing the Replicated NAS Recovery Jobs on Target
•
Deleting the Replicated VTL Recovery Jobs on the Target
•
Deleting the Replicated NAS Recovery Jobs on Target
•
Listing the Replicated VTL Failback Jobs on the Target
•
Listing the Replicated NAS Failback Jobs on the Target
•
Deleting the Replicated VTL Failback Jobs on the Target
•
Deleting the Replicated NAS Failback Job on the Target
•
Aborting the Replicated VTL Failback Jobs on the Target
•
Aborting the Replicated NAS Failback Job on the Target
•
Enabling the VTL Cartridge Based Replication on the Target
•
Enabling NAS File/Directory Based Replication on the Target
•
Disabling VTL Cartridge Based Replication on the Target
•
Disabling NAS File/Directory Based Replication on the Target
•
Downloading a Replication Report
•
Initiating a Cartridge
Based, File/Directory
Based, or Namespace
Replication
syscli --replicate vtl --name <VTL_name> --barcode <barcode> |
--namespace [--disbleok]
This CLI command allows the CLI admin to initiate a replication the for a
specified VTL. If the
--barcode
option is specified, only the cartridge with
specified barcode on the specified VTL will have replication initiated. The VTL
