![background image](http://html1.mh-extra.com/html/quantum/dxi2500-d/dxi2500-d_manual_3791090138.webp)
Quantum DXi-Series Command Line Interface (CLI) Guide
6-66538-03 Rev C
November 2010
138
Other System Configuration CLI Commands
Editing an SNMP Community
syscli --edit snmpcom --name <community_name> [--ipaddress
<community_IP_address>] [--netmask <community_net_mask>]
[--accesstype {get | getset}] [--disable]
This CLI command allows the CLI admin to edit an SNMP community.
Deleting an SNMP Community
syscli --del snmpcom --name <community_name>
This CLI command allows the CLI admin to delete an SNMP community.
Deleting All SNMP Communities
syscli --deleteall snmpcom [--sure]
This CLI command allows the CLI admin to deleted all SNMP communities. If the
--sure
option is specified, no confirmation prompt will be displayed.
Sending a Test Trap
syscli --test snmptrap (--trapip <trap_destination>)
This CLI command allows CLIadmin to send test traps to all the listed
destinations.
SNMP CLI Error Codes
The following SNMP CLI Error codes are supported:
E8000001 Invalid SNMP name
E8000401 ListSnmptrapdest: Option "list" is missing.
E8000402 ListSnmptrapdest: Option "list" requires a value
E8000403 ListSnmptrapdest: Option "list" has invalid value
E8000404 ListSnmptrapdest: Failed to read/get option "list".
E8000405 ListSnmptrapdest: Failed to write/set option "list".
E8000406 ListSnmptrapdest: Failed to retrive trap destination list.
E8000407 ListSnmptrapdest: No traps have been configured.
E8000421 ListSnmptrapdest failed!
E8000801 AddSnmptrapdest: Option "add" is missing.
E8000802 AddSnmptrapdest: Option "add" requires a value
E8000803 AddSnmptrapdest: Option "add" has invalid value
E8000804 AddSnmptrapdest: Failed to read/get option "add".
E8000805 AddSnmptrapdest: Failed to write/set option "add".
E8000811 AddSnmptrapdest: Option "ipaddress" is missing.
E8000812 AddSnmptrapdest: Option "ipaddress" requires a value