Quantum DXi-Series Command Line Interface (CLI) Guide
6-66538-03 Rev C
November 2010
162
Other System Configuration CLI Commands
This CLI command provides a list of path to tape initiators that are present on
the system.
Listing the Path to Tape Ports
syscli --list port
This CLI command provides a list of initiator and target ports that are present on
the system. The output parameters Row and Column of this command give the
relative node port location in row and column, respectively.
Path to Tape CLI Error Codes
The following generic path to tape error codes are supported:
E9000401 ListPttinitiator: Option "list" is missing.
E9000402 ListPttinitiator: Option "list" requires a value
E9000403 ListPttinitiator: Option "list" has invalid value
E9000404 ListPttinitiator: Failed to read/get option "list".
E9000405 ListPttinitiator: Failed to write/set option "list".
E9000421 ListPttinitiator failed!
E9000801 ListPort: Option "list" is missing.
E9000802 ListPort: Option "list" requires a value
E9000803 ListPort: Option "list" has invalid value
E9000804 ListPort: Failed to read/get option "list".
E9000805 ListPort: Failed to write/set option "list".
E9000821 ListPort: Unable to get the node count.
E9000851 ListPort failed!
