Quantum DXi2500-D, Manual

Page: 128 / 162

Quantum DXi-Series Command Line Interface (CLI) Guide
6-66538-03 Rev C
November 2010
128 Other System Configuration CLI Commands
From Email address = DX75@quantum.com
Setting the Outgoing Email Server
syscli --set emailserver --hostname <server_name_or_IP> --emailaddr
<from_email_address>
This CLI command allows the CLI admin to add an outgoing Email server that
will be used to send the Email to configured recipients.
Deleting the Outgoing Email Server
syscli --del emailserver
This CLI command allows the CLI admin to delete an outgoing Email server.
Sending a Test Email
syscli --send testemail --name <recipient_name>
This CLI command allows the CLI admin to send a test email to verify Email
configuration.
E
-
mail Home CLI
Commands
The following e - mail home commands are supported:
• Getting the Email Home Information
• Enabling or Disabling the Email Home Scheduler
• Adding an Email Home Schedule Recipient
• Deleting an Email Home Schedule Recipient
• Deleting All Email Home Receipts
• On Demand Email Home Status
• On Demand Email Home Configuration
• Email CLI error Codes
Getting the Email Home Information
syscli --get emailhome
This CLI command allows the CLI admin to display the state of the scheduled
Email home configuration information. It displays the schedule and the
recipients. An example output of Email Home Schedule is shown below.
Email Home Schedule Details
Email Home Scheduler =
Send weekly on =
at = %d:00
to the following recipients:
Recipient 1 = receiver1@ehome.com