Scale Calibration
Scale Calibration
CubiScan 125 Service Manual
1 6
4. If the weight and weight units displayed are correct for the test weight you are using, proceed
to the next step.
If not, change the weight units as follows:
Tap the displayed weight unit. It will turn green. Then tap
[+]
or
[-]
to change the unit (e.g.,
from “lb” to “kg”). Tap the weight unit again to save the changes and return the display to
normal.
If not, change the weight as follows:
Tap the displayed weight. It will turn green. Then tap
[Prev]
or
[Next]
to select your digit
position. Tap
[+]
or
[-]
to increase or decrease the selected value.
5. Tap
[Next]
to continue, and the following screen is displayed.
Figure 7
First Scale Calibration Screen
