QUANTA STRATOS S210 Series S210-X12MS, Technical Manual

Page: 200 / 223

R
AIL
K
IT
A
SSEMBLY
I
NSTALLING THE
R
ACK
B
RACKETS
6-3
Installing the Outer Rail
1. Align the screws on the outer rail with the screw holes on
the front cabinet column.
2. Guide the screws on outer rail through the screw holes on
the front cabinet column until the rail clicks in place.
3. Extend the rear side of the outer rail, to reach the rear
cabinet column.
4. Guide the screws on outer rail through the screw holes on
the rear cabinet column until the rail clicks in place.
Figure 6-3. Installing the Outer Rail
5. Repeat steps 1 to 4 for the second rail.
Figure 6-4. Aligning the Rails
6. Align the inner rail with the outer rail.
7. Horizontally install the system half way into the slide rail.
8. Slide the release tab into locked position.
2
4
WARNING!
Prior installing the system into the slide rail, make sure the
ball bearing retainer is locked forward.
CAUTION!
H
EAVY OBJECT
. T
WO PEOPLE ARE REQUIRED TO SAFELY HANDLE THE
SERVER
. A
LWAYS ASK FOR ASSISTANCE TO INSTALL OR REMOVE THE
SERVER
..
!
!
Inner Rail
Outer Rail
Inner Rail
Outer Rail