QUANTA STRATOS S210 Series S210-X12MS, Technical Manual

Page: 158 / 223

I
NSTALLING
H
ARDWARE
C
ONFIGURATION
G
ROUP
4-
2
3
To open LDAP Settings page, click Configuration > LDAP
from the main menu. A sample screenshot of LDAP Settings
Page is shown in the screenshot below.
Figure 4-17. LDAP Settings Page
The fields of LDAP Settings Page are explained below.
Procedure:
Entering the details in Advanced LDAP Settings Page
1. In the LDAP Settings Page, click Advanced Settings. A
sample screenshot of LDAP Settings page is given below.
Figure 4-18. Advanced LDAP Settings
2. To enable/disable LDAP Authentication, check or
uncheck the Enable checkbox respectively.
3. Enter the IP address of LDAP server in the IP Address
field.
Table 4-29: LDAP Settings Page
I
TEM
D
ESCRIPTION
Advanced Settings
To configure LDAP Advanced Settings. Options
are Enable LDAP Authentication, IP Address,
Port and Search base.
Add Role Group
To add a new role group to the device.
Alternatively, double click on a free slot to add a
role group.
Modify Role Group To modify the particular role group.
Delete Role Group To be delete a role group from the list.
Note:
At login prompt, enter username to login as an LDAP group mem-
ber.
Note:

IP Address made of 4 numbers separated by dots as in
'xxx.xxx.xxx.xxx'.

Each Number ranges from 0 to 255.

First Number must not be 0.

Supports IPv4 Address format and IPv6 Address format.