QUANTA STRATOS S210 Series S210-X12MS, Technical Manual

Page: 164 / 223

I
NSTALLING
H
ARDWARE
C
ONFIGURATION
G
ROUP
4-
2
9
Procedure:
1. Click the Event Filter Tab to configure the event filters in
the available slots
2. To Add an Event Filter entry, select a free slot and click
Add to open the Add event Filter entry Page. A sample
screenshot of Add Event Filter Page is in seen the
screenshot below.
Figure 4-23. Add Event Filter Entry Page
3. In the Event Filter Configuration section,

PEF ID displays the ID for configured PEF entry (read-
only).

In filter configuration, check the box to enable the PEF
settings.

In Event Severity, select any one of the Event severity
from the list.
4. In the Filter Action configuration section,
Event Severity
To choose any one of the Event severity from the
list.
Sensor Name
To choose the particular sensor from the sensor
list.
Add
To add the new event filter entry and return to
Event filter list.
Modify To modify the existing entries.
Cancel
To cancel the modification and return to Event
filter list.
Table 4-32: PET Management - Event Filter (Continued)
I
TEM
D
ESCRIPTION