Quant 3D Q300 3D, User Manual

Page: 11 / 33

Automatic Nozzle Height Detection
Select "Nozzle Height Detect" in the "3D
Print" menu of the UP Software. The print
head will move toward the nozzle height
detection device and the nozzle will
eventually touch and press the metal part on
the device to make the measurement.
The detected nozzle height value will be
stored in the in the machine.
If consistent warping still occurs after auto-leveling, this may be due
to a severe unleveling of the platform which exceeds the capability of
the auto-leveling function. In this case, you should perform a coarse
manual leveling before auto-leveling (see next page).
You may also level the platform without using the auto-leveling and
nozzle detection functions. Please refer to Appendix A for details