Quant 3D Q300 3D, User Manual

Page: 18 / 33

Printing Progress
Printing progress is shown in the LED progress bar above the Q300 letters. The first two red
LEDs represent that the model raft is printing, and the others represent that the rest of the
model is printing.
Pausing a Print
During a print, the machine can be paused
through the "Maintenance" interface.
When the printer is idle, there is a "Table heat
1 hr" button under the "Stop All" button. Press
this button to keep the platform heated for one
hour.
When the printer starts to print, the "Table heat
1 hr" button will disappear. The button will
reappear after the model raft is finished
printing, but the button becomes "Pause Print,"
which indicates that the pause function is now
available. Press this button to pause the print
and the button will become "Resume Print" for
resuming the print.
While the print is paused, the other buttons on
the maintenance interface will become
available. You can change filaments using the
"Withdraw" and "Extrude" buttons or move the
print head and print platform with the location
buttons and the "To" button. Make sure to not
crash the print head into the model.