Quant 3D Q300 3D, User Manual

Page: 30 / 33

Appendix A
Fine Manual Calibration
1. Setting the Nozzle Height
Open:
Menu
-
3D Print
-
Platform Calibration
.
A. Moves the platform up/down:
click and hold the buttons to
move the platform accordingly.
B. Displays the current platform
height.
C. Sets the nozzle height: click
this to set the current platform
height as the nozzle height.
D. Nine platform calibration point
buttons. After clicking these, the
nozzle will move to the
corresponding positions. The drop-
down menu beside the button is
for setting the leveling
compensation values.
Initialize the printer.
Put a piece of paper on the platform.
Open the calibration interface and
press the up arrow key. Note the
current height value and stop raising
the platform at about 190.0.