Quant 3D Q300 3D, User Manual

Page: 10 / 33

Automatic Platform Calibration
Platform calibration is the most important step for successfully printing as it ensures part
adhesion on the first layer. Ideally, the distance between the nozzle and the platform is
constant, but in reality the distance varies at different positions due to many reasons (e.g. a
slightly tilted platform) and this could cause warping on prints or even a complete print
failure. Fortunately, the Q300 has automatic platform calibration and automatic nozzle
height detection functions. By using these two functions, the calibration process can be
completed quickly and easily.
In the "3D Print" menu in the UP Software,
select "Auto Level" to initiate auto leveling.
The leveling probe will be lowered and start
to probe nine positions on the platform. After
probing the platform, the leveling data will be
updated and stored in the machine. The
leveling probe retracts automatically.
Calibration Tips:
1. Perform calibrations when the nozzle is not heated.
2. Remove residual plastic on the nozzle before calibrating.
3.
A perf board should be fitted on the platform during calibration.