Quant 3D Q300 3D, User Manual

Page: 31 / 33

Hit the "5" button to center the nozzle
on the platform.
Raise the platform until it is just
touching the nozzle. Move the
paper between the nozzle and the
platform to see if there is any
resistance.
Platform too high;
nozzle is pinning
paper onto platform.
Lower platform
slightly
.
Just right. Can feel
some resistance
when moving paper
Platform too low;
no resistance at all
when moving
paper. Raise
platform slightly
When the ideal platform height is
obtained, note the value of the
"Current Height." This is the
platform
height value
. Repeat steps 1
–6 for
all of the other eight positions and
note their platform height values.