Quant 3D Q300 3D, User Manual

Page: 33 / 33

For example: setting the
compensation value for calibration
point 3. Assume the "platform
height" is 208.7 and the "nozzle
height" is 208. The compensation
value should be set to 0.7.
After setting 0.7 in the drop-down
menu, the nozzle will move to point
3 and the platform will rise 0.7mm.
Now use the paper again to verify
the compensation value.
After setting all calibration points,
click "Appy/Save Current Values"
to finish the calibration.