Quant 3D Q300 3D, User Manual

Page: 13 / 33

Preparing to Print
Make sure the printer is
switched on and connected to
the computer. Select:
Main
Menu
-
3D Print
-
Maintenance
.
Click "New Spool," choose ABS,
and input the filament weight.
Click "Extrude." The print head
will start to heat up, within five
minutes. Its temperature will
reach 260°C, then the printer will
buzz and the print head will start
to extrude.
Gently insert the filament into the
small hole on the print head. The
filament will be fed into the print
head automatically when it
reaches the extruder gear inside
the print head.
Check the nozzle for plastic
extrusion. If plastic is coming out
from the nozzle that means the
filament is loading correctly and the
printer is ready for printing. (The
extrusion will stop automatically.)
.