Quadstick FPS, User Manual

Page: 77 / 94

Infrared Remote Control
The Infrared transmitter LED on the back panel can be programmed to send IR Remote Control
codes. The IR command names are listed below are treated the same as outputs for other
kinds of devices in a configuration profile sheet. The specific codes sent for each command are
defined on a second sheet, named “IR Codes”, that contains the
Philips Pronto Hex Code for
the particular TV or A/V devices.
Output Name Description
ir_tv_channel_up Xmit IR code from command table
ir_tv_channel_down Xmit IR code from command table
ir_tv_volume_up Xmit IR code from command table
ir_tv_volume_down Xmit IR code from command table
ir_tv_on_off Xmit IR code from command table
ir_tv_select_input Xmit IR code from command table
ir_play Xmit IR code from command table
ir_stop Xmit IR code from command table
ir_fast_forward Xmit IR code from command table
ir_rewind Xmit IR code from command table
ir_skip_forward Xmit IR code from command table
ir_skip_back Xmit IR code from command table
ir_record Xmit IR code from command table
ir_pause Xmit IR code from command table
ir_mute Xmit IR code from command table
ir_guide Xmit IR code from command table
ir_menu Xmit IR code from command table
ir_cancel Xmit IR code from command table
ir_select Xmit IR code from command table
ir_up Xmit IR code from command table
ir_down Xmit IR code from command table
ir_left Xmit IR code from command table
ir_right Xmit IR code from command table
ir_aux1 Xmit IR code from command table
ir_aux2 Xmit IR code from command table
ir_aux3 Xmit IR code from command table
ir_aux4 Xmit IR code from command table
Table 7: Infrared Remote Control command list
77