Quadstick FPS, User Manual

Page: 65 / 94

•
If U/A continues to flash, reverse the order of the ports used by the Quadstick and the
XBox controller.
PCPROG port
• See PS4 CronusMax – PCPROG
Nintendo Switch
The Nintendo Switch can be used in three ways:
1. Direct connection with firmware QS 1820 or later and USB emulation mode 5 (Nintendo
Switch).
2. Coov N100 USB converter, and the Quadstick in USB emulation mode 3 (XBox 360 for
PC)
3. Brook Accessory PS3/PS4 to Nintendo Switch Super Converter. The Quadstick is used
in USB emulation mode 0 or 1. (Default or DS4).
When the Quadstick is directly connected to the Nintendo Switch and the Switch is powered up
using its power button, it only allows 45 seconds from power up until the first controller A button
must be pressed, or it will go back to sleep. A Quadstick needs to be changed from the default
configuration to a Switch game configuration file (that has USB emulation mode 5) and the A
button pressed within 45 seconds. If the console is first turned on with its original controller, the
45 second time out does not apply. If the Switch goes into sleep mode, the Quadstick will reset
continuously and may need to be unplugged and plugged in again to work. Sleep mode can be
disabled in the NS settings.
The Coov N100 converter is very simple to use, just connect it between the Quadstick and the
Switch’s USB port. Select a configuration file with the XBox 360 emulation mode. Coov
firmware updates are very simple to apply when needed.
The Brook Super Converter is more difficult update and use but since it actually connects
wirelessly to the Switch, it only needs power and the Quadstick plugged in the back, allowing
more flexibility in your cables.
65