Quadstick FPS, User Manual

Page: 37 / 94

sip_puff_maximum 70 percent
Percent of full scale Pressure to scale into 100% button push
pressure
sip_puff_delay_soft 1000 ms Time delay before detecting Soft Sip/Puff or Inner Joystick Zone
lip_position_minimum 8 percent Percent of full scale of lip movement to initiate output
lip_position_maximum 35 percent Percent of full scale of lip movement for 100% output
mouse_speed 100 percent Speed control for mouse cursor movement
mouse_response_curve 1 0=linear, 1=mixed curve, 2=parabolic
volume 40 percent Initial Speaker Volume
brightness 75 percent Initial Status LED brightness
digital_out_1 0 on/off Initial output state for relay 1
digital_out_2 0 on/off Initial output state for relay 2
bluetooth_device_mode none Bluetooth HID Device Selection
bluetooth_authentication_mo
de
2 Bluetooth Authentication Selection
bluetooth_connection_mode pair Bluetooth pairing control
bluetooth_throttle 15 ms Bluetooth mouse report interval in ms.
enable_swap_inputs 0 Allow user to swap inputs with Lip sensor
enable_select_files 1 Allow user to select a configuration file
enable_usb_a_device 0
DO NOT
CHANGE
1=USB-A port active, 0=USB-B port active
enable_DS3_emulation 0
DO NOT
CHANGE 0=Normal PS3 mode, 1=DS3 emulation, 2=X360CE mode,
3=XB360 emulation
enable_rumble 0 1=Buzz when Rumble activated, 0=silent. Requires DS3=1
The joystick_deflection_minimum and maximum settings are relative to the full mechanical
movement of the joystick. They control the overall sensitivity of the joystick movement. The
deflection_multiplier_* values adjust the overall sensitivity for the four individual directions.
In the QMP Joystick tab, the joystick_deflection_* and multiplier values are displayed in the
lower right corner.
The joystick_D_Pad_inner and _outer settings are relative to the scaled signal calculated as a
result of the earlier deflection settings.
37