Quadstick FPS, User Manual

Page: 64 / 94

XBox One (& 360)
The XBox One and XBox 360 consoles can be used with either a CronusMax Plus or a Brook
Super Converter.
Brook Accessory PS3/PS4 to XBox One Super Converter
The Brook Super Converter (BSC) simply connects between the Quadstick and the console.
Unlike the CronusMax, there is no need to “authenticate” the converter each time power is
applied. A Windows PC may be needed occasionally for firmware updates. The Quadstick
operates in USB emulation modes 0 or 1 when used with the BSC.
CronusMax Plus
The CronusMax can be used with or without a USB hub with the XBox One.
The authentication challenge and response happens once at startup so when the connection is
authenticated there is no need for a continuous connection with the XBox One controller like
there is with the PS4.
Remove the battery pack from the game controller to ensure it turns off after
authenticating the CronusMax.
Full instructions are available on the CronusMax.com website .
Without a USB Hub
•
Start with the XBox controller OFF.
• Turn on the console using the front panel. Leave the controller off.
• Plug the CronusMax into the console.
•
Observe an alternating U/A on the CronusMax display.
•
Connect the XBox controller to the CronusMax Input port.
• Wait for the U/A to stop flashing on the CronusMax display. Replaced by a number (the
active slot. Default is 0)
•
Unplug the XBox controller.
•
Plug in the Quadstick.
With a USB Hub
• Start with the XBox controller OFF.
•
Turn on the console using the front panel. Leave the controller off.
• Plug the CronusMax into the console.
• Plug the hub into the CronusMax input port with the XBox controller connected to one
port and the Quadstick connected to the other.
•
The CronusMax display should display a number after a few seconds.
64