quadient IS-480 User Manual Download Page 86

Page: 86 / 298

Either:

Tap the

Rate

zone on the home screen

Press

and select the path:

Rate selection

Press

The Rate Selection screen is displayed.

On that screen, you can:

Press one of the rate buttons

1 to 9

(or type the number) to select the rate or display

rate options.

Press

Postage Rate History

to select a recently selected postage rate or

Rate wizard

to build your rate with the wizard.

To re-set your system to the Default Postage Rate and to re-fresh

the Weight displayed on the Home Screen, press

at anytime.

Follow the instructions on screen and, once you have chosen the postage rate and
services, press

[OK]

to validate your selection.

The Postage Amount displayed on the Home Screen will always
be zero until a weight is entered into the system.

Processing

Mail

| Page 81 | Jun-08-2016 10:21 |

Summary of Contents for IS-480











































































































































































































































































































Search results

Summary of Contents for IS-480

Reviews:

Brands by name

Popular brands

quadient IS-480, User Manual

Search results

Summary of Contents for IS-480

Reviews:

Brands by name

Popular brands