quadient IS-480 User Manual Download Page 171

Page: 171 / 298

Multi Account Report

This report displays postal expenditures for all the accounts over a selected time period,
sorted by ascending account number.

The report displays all the accounts in 'active' status, and accounts 'inactive' or 'deleted'
with a postage value.

Requirements

This report is available as a user or a supervisor.

The current account mode has to be 'Accounts' or 'Accounts, with Access Control'.

You have to specify the period for the report (Begin and End dates).

Default period:

• Begin = 1st day of current month
• End = Current date

166

| Page 166 | Jun-08-2016 10:21 |

Reports

Summary of Contents for IS-480











































































































































































































































































































Search results

Summary of Contents for IS-480

Reviews:

Brands by name

Popular brands

quadient IS-480, User Manual

Search results

Summary of Contents for IS-480

Reviews:

Brands by name

Popular brands