quadient IS-480 User Manual Download Page 51

Page: 51 / 298

How to Apply Postage (Running Mail)

In mode Standard Weighing

From the [

Standard

] home screen, to print postage directly on mail pieces:

Put the mail piece on the Weighing Platform.

The weight of the mail piece is displayed in the Weight area of the screen and the
postage amount is updated.

Press

. The system motors start running.

Remove the envelope from the WP and insert it into the mail path against the rear-guide
wall, with the side to be printed facing upwards.

If a mail piece is bigger than mail path maximum thickness, press

to print a label. The label is printed. To know the maximum

thickness, see

Mail Specifications

on page 281.

The Mailing System prints postage and the mail piece (or label) is sent to the catch
tray.

When using sealer, collect the mail piece stack in the catch tray
and put stack aside to let envelopes dry.

| Page 46 | Jun-08-2016 10:21 |

Processing

Mail

Summary of Contents for IS-480











































































































































































































































































































Search results

Summary of Contents for IS-480

Reviews:

Brands by name

Popular brands

quadient IS-480, User Manual

Search results

Summary of Contents for IS-480

Reviews:

Brands by name

Popular brands