quadient IS-480 User Manual Download Page 260

Page: 260 / 298

Cleaning the Mail Path

10.3

Cleaning the mail path includes:

• Cleaning sealer brushes and sponge
• Cleaning feeder belts and rollers
• Cleaning the Mailing System sensors on the mail path.

Cleaning Brushes and Sponge of the Sealer

MAKE SURE YOUR SYSTEM IS DISCONNECTED FROM POWER
SOURCE BEFORE CLEANING!

How to Clean the Brushes and Sponge (Sealer)

To clean the brushes and sponge of the feeder:

Open the feeder and push the left of the upper blue release lever to raise the upper
drive assembly.

Pull up the brush release lever.

255

| Page 255 | | Jun-08-2016 10:21 |

Maintaining

your

Mailing

System

Summary of Contents for IS-480











































































































































































































































































































Search results

Summary of Contents for IS-480

Reviews:

Brands by name

Popular brands

quadient IS-480, User Manual

Search results

Summary of Contents for IS-480

Reviews:

Brands by name

Popular brands