quadient IS-480 User Manual Download Page 131

Page: 131 / 298

Naming limitation

Account names and group names must be unique in the account
structure.

Additional information

See also

• About changing the maximum number of accounts, see

Account level

on page 187.

• Printing the current account list:

Account List Report

on page 163.

The

Budget and Surcharge

settings are only available when the

Advanced Reporting option is activated. See

Budget and Surcharge

Preferences

on page 146.

Group Settings

A Group or Subgroup has the following settings, displayed on the Add Group screen:

Description

Format

Setting

Name that you will use when assigning Groups or
Subgroups of Accounts to Operators.

This name has to be unique.

32 Alphanumeric
characters

Name

If a Group is not active, the corresponding Accounts
are not visible. Users cannot select these Accounts.

Active / Inactive

Status

126

| Page 126 | Jun-08-2016 10:21 |

Managing

Accounts

and

Assigning

Rights

Summary of Contents for IS-480











































































































































































































































































































Search results

Summary of Contents for IS-480

Reviews:

Brands by name

Popular brands

quadient IS-480, User Manual

Search results

Summary of Contents for IS-480

Reviews:

Brands by name

Popular brands