quadient IS-480 User Manual Download Page 226

Page: 226 / 298

How to Edit / Modify an Impression Memory

To edit or modify an impression memory:

As supervisor (see

How to Log in as Supervisor

on page 192):

Press

and select the path:

Impression Memory

Select an impression memory from the list displayed on the screen.

Press

[OK]

to validate.

Select the menu path

Edit

The Impression memory modification screen is displayed.

Use the arrows to select the preferences, then press

[OK]

to modify the parameters.

Press

to exit.

How to Delete an Impression Memory

To delete an impression memory:

As supervisor (see

How to Log in as Supervisor

on page 192):

Press

and select the path:

Impression Memory

Select an impression memory from the list of saved impression memories.

Press

[OK]

to validate.

Select the menu path

Delete

Press

[OK]

to confirm to delete the impression memory.

Configuring

your

Mailing

System

221

| Page 221 | Jun-08-2016 10:21 |

Summary of Contents for IS-480











































































































































































































































































































Search results

Summary of Contents for IS-480

Reviews:

Brands by name

Popular brands

quadient IS-480, User Manual

Search results

Summary of Contents for IS-480

Reviews:

Brands by name

Popular brands