45
DS-1200 G4i Operator Manual Issue 4 - Nov 2020
5
Select document size. If you change default dimensions, size will change to
Custom
.
6
Enter the Address position and Paper type (standard or glossy). If the
document is pre-folded, enter the number of leaves it folds into.
7
Enter the paper weight and the document thickness and weight will
automatically calculate, or press
Computed
and enter actual figures.
8
If using barcode or OMR marked documents, enter the definition name. Press
Region of Interest
to specify label position.
9
Enter the location of the label and press
OK.
10
if
Doc Id mode
is to be used, select
On
. This reads a label character and
compares its string value with the string entered in
Doc Id
. This confirms that the
correct document type is used.
11
The shield setting controls the amount of shielding over the separator rollers,
and should not normally require adjustment. However, if stream-feeding or erratic
double feeds occur, try moving the shield back (ie. reducing the percentage). If
documents are not properly picking up, move it forward.
12
Press
Save
when done.
The document is now fully defined and is available for use.
Documents can also be created from the Menu screen if you
have appropriate access rights.
