16
DS-1200 G4i Operator Manual Issue 4 - Nov 2020
4.3.3 Fine tuning of settings
Fine adjustments apply only to current job.
Inserter Fine Tuning
On the Run screen graphic, press anywhere on the Inserter icon.
Note that each heading expands.
You can change:
•
Seal mode:
Turn off to leave envelopes unsealed.
•
Doubles detect:
Turn off if thick or dark envelopes give false readings.
•
Separator wear:
Adjust separator gap only if needed (1 clock = 0.015mm).
This changes the gap on the unit and applies to all jobs: see also
Gap Adjust
below
.
•
Documents
: Changes to the envelope depth, width, flap and throat.
•
Wetting:
changes the amount of wetting (1-8) where higher numbers give
greater wetting.
