19
DS-1200 G4i Operator Manual Issue 4 - Nov 2020
Folder Fine Tuning
On the Run screen graphic, press anywhere on the Folder icon.
Note that each heading expands.
You can change:
•
Feed control mode:
Turn off to disable folder.
•
Doubles detect:
Turn off if thick or dark documents give false readings.
•
Address adjust:
Adjustment up or down of address position in envelope
window.
•
Load to Reader (reading units only):
this will feed one document into
position under the reader. Press
Reader On
to test the reader,
Reader Off
to
end the test. Remove the document and replace on feed hopper.
•
Separator wear:
Adjust separator gap only if needed (1 clock = 0.015mm).
This changes the gap on the unit and applies to all jobs: see also
Gap Adjust
below
.
•
Documents
: Changes to the insert depth & width.
