QSC touchmix-30 pro User Manual Download

Page: 79 / 146

1001108-01-F

2-Trk Playback – Audio Player

Plays MP3 audio files from a USB memory device.

NOTE:

Make sure the Sample Rate set

in the Mixer Setup matches the sample
rate of the MP3 file.

Audio Player tab –

touch to display Audio

Player controls.

MP3 Songs

– Displays a list of MP3 titles

on the inserted USB drive.

MP3

– Displays title of currently selected MP3

file.

4. Top-of-List – Touch to move to the beginning of

the file list.

5. Previous file – Touch to move to the previous file

in the file list.

6. Play – Touch to begin playback of the currently

selected MP3 file.

7. Next file – Touch to move to the next file in the

file list.

8. Stop Play – Touch to stop playback of the

currently selected MP3 file.

9. Playback Time – Indicates elapsed time since

beginning playback.

10.

Recording Mode –

Touch to change from

MP3 Playback mode to either Multitrack USB
Drive or Multitrack DAW.

11. 00:00:00 – Represents the start of the file.

12. Progress Line indicates the approximate playback position in the file.

13. HH:MM:SS – Indicates the length of the file.

Press Rec/

Play

Touch

Recording

Mode

Touch Stereo

MP3

Touch Audio

Player

Rec/

Play

Recording

Mode

Audio
Player

Stereo MP3

USB Drive Playback

Summary of Contents for touchmix-30 pro



















































































































































Search results

Summary of Contents for touchmix-30 pro

Reviews:

Related manuals for touchmix-30 pro

Brands by name

Popular brands

QSC touchmix-30 pro, User Manual

Search results

Summary of Contents for touchmix-30 pro

Reviews:

Related manuals for touchmix-30 pro

Brands by name

Popular brands