42
1001108-01-F
•
Gain
– Displays and sets the overall output gain to makeup any loss after the signal is compressed.
20.
Gate –
To adjust the following parameters, select the field then use the Master encoder or the up/down nudge buttons on a mobile device.
•
Gate
– Engages or disengages the Gate.
•
Threshold
– Displays and sets the signal level at which the Gate allows audio to pass.
•
Attack
– Displays and sets how quickly the gate reacts to a signal that exceeds the threshold.
•
Release
– Displays and sets how quickly the Gate attenuates the audio when signal falls below threshold.
•
Attenuation
– Displays and sets the amount of attenuation applied to the output when the signal is below the Threshold.
•
Hold
– Displays and sets the minimum time the Gate stays open once it is opened, and the length of time the Gate stays open after the
input level drops below the Threshold.
21.
FX Sends
–
• Displays the system numbers and user-defined names for the FX channels.
• Adjustable sliders send signal from this channel to the associated FX processors.
22.
Aux Channel Link icon
– Indicates the two channels are linked.
23.
Aux Pan control –
When two channels are linked, the even number send slider becomes a pan control..
24.
M
– Indicates if the channel send to the Aux mix is muted.
