QRP Labs QCX-mini, Assembly Instructions Manual

Page: 67 / 133

3.31 Install LCD module
La précision de l'assemblage est essentielle - suivez attentivement le guide ci-dessous.
Identify the pairs of M3 6mm screws and
nuts. They may be nylon or metal. Fit the LCD module from behind the PCB,
with its body through the rectangular cut-out
Bolt the LCD module, ensuring equal gaps
at top and bottom; tighten screws firmly. Drop component off-cuts through the 16
holes, their bottom ends sitting on the bench
Solder the component off-cut wires to the
top of the PCB and trim (cut) the excess wire Turn over the PCB. Ensure the LCD sits flat
on the PCB before soldering; trim excess.
Cut these wires VERY short to avoid
touching components on the main PCB later.
QCX-mini assembly Rev 1.05_Fr
67