QRP Labs QCX-mini, Assembly Instructions Manual

Page: 6 / 133

Qty Valeur Description Nbr - Component
1 4.3K SMD R18
1 5.1K SMD R11
16 10K SMD R1,2,7,10,14,21,34,36,39,40,46,51,52,57,58,64
2 33K SMD R28, 29
2 36K SMD R32, 33
2 47K SMD R30, 31
4 120K SMD R38, 43, 60, 100 (R100 on display board)
1 750K SMD R35
1 500-ohm Multi-turn trimmer
potentiometer
R27
2 50K Multi-turn trimmer
potentiometer R17, 24
1 5K Linear potentiometer R36 (on controls board)
1 22K Trimmer
potentiometer R47 (on display board)
Capacitors (50V, Multi-layer Ceramic capacitors)
Qty Value Description Component numbers
5 1nF SMD C14, 16, 18, 23, 33
2 2.2nF SMD C19, 20
1 3.3nF SMD C53
4 10nF SMD C4, 7, 10, 42
1 33nF SMD C15
1 39nF SMD C17
1 47nF Label “473” C9
1 47nF SMD 13
2 0.1uF Label “104” C12, 29
14 0.1uF SMD C2, 3, 6, 32, 34-36, 39-41, 48-50, 52
5 0.47uF Label “474” C11, 43-46
2 1uF Label “105” C21, 22
2 2.2uF SMD C31, 100 (C100 on display board)
3 10uF SMD C37, 38, 51
1 10uF Electrolytic/tantalum In parallel with C38 (may be in LPF bag)
2 470uF Electrolytic C24, 47
1 30pF Ceramic trimmer
capacitor C1
Band-specific capacitors (50V, , 5% capacitors which must be C0G/NP0 type)
80m
QCX-mini assembly Rev 1.05_Fr
6