QMS 1800409-001A, User Manual

Page: 118 / 436

Saving Configuration Selections
Press the Online/Offline key to exit the Configuration menu or
press the Menu key to back out of the Configuration menu one level
at a time. If you made changes before exiting the menu, the message
window displays
SAVE CHANGES?
NO
If you don’t want the changes you made to take effect, press Select,
and then press the Online/Offline key to put the printer back on
line.
If you want the changes you made to take effect, press the Next key
to change
NO
to
YES
and then press the Select key. The changes
are saved and take effect when you put the printer back on line. If
the Message Window displays
WAITING FOR IDLE
, the system
is finishing jobs in progress under the old configuration values, but
is not allowing any new jobs to begin. The printer then accepts new
jobs and processes them using the new configuration values.
NOTE: Some menu changes require that the printer be rebooted
before they take effect, including the following:
Operator Control/Media
Administration/Communications/Serial/Mode
Administration/Communications/Parallel/Mode
Administration/Emulations/ESP Default
Administration/Startup Options/Error Handler
Administration/Disk Operations/Spool Overflow
Administration/Disk Operations/Collation
Chapter 4
4 - 1 2 P r i n t e r C o n f i g u r a t i o n