4 – Interactive Mode Commands
Port Level Info & Operations Menu
4-46
SN0054621-00 E
S
Remove a Send Target
Select the
Remove a Send Target
option to remove only non-persistent or send
targets local to the SANsurfer iSCSI HBA CLI database. To remove targets stored
in the HBA database, use the
Delete Target
option instead (see
page 4-39
). The
Remove a Send Target
option does not require a save to take effect.
Login and Persist a Discovered Target
Select the
Login and Persist a Discovered Target
option to log in and persist a
target that has been discovered but not yet logged in. Before this option can take
effect, you must select the
Save Target/CHAP Settings
option (see
page 4-47
).
Duplicate a Persistent Target
Select the
Duplicate a Persistent Target
option to copy a target in the HBA
database and assign a new ISID to the new target. You can use the duplicate
target for multi-pathing/failover. Before this option can take effect, you must select
the
Save Target/CHAP Settings
option (see
page 4-47
).
Duplicate a Discovered Target
Select the
Duplicate a Discovered Target
option to copy a discovered target that
is not logged in. This option does not require a save to take effect.
Remove Discovered Target
Select the
Remove Discovered Target
option to remove a target that is
discovered and persisted. To remove targets stored in the HBA database, use the
Delete Target
option instead (see
page 4-39
). The
Remove Discovered Target
option does not require a save to take effect.
Display iSNS Settings
Select the
Display iSNS Settings
option to view the settings for the currently
configured iSNS. This option functions the same as
“Display Network Settings
(CLI Options -netconf)” on page 4-20
.
Configure iSNS
Select the
Configure iSNS
option to set up iSNS. This option functions the same
as
“Display Network Settings (CLI Options -netconf)” on page 4-20
. iSNS
discovered targets are shown with the other discovered targets. You can also log
in those targets using the
Configure iSNS
option.
Summary of Contents for SANsurfer iSCSI HBA CLI
Page 32: ...2 Installation and Removal Removing SANsurfer iSCSI HBA CLI 2 14 SN0054621 00 E S Notes...
Page 136: ...C Target Parameters C 6 SN0054621 00 E S Notes...
Page 150: ...D Error Codes Non interactive Mode Error Codes D 14 SN0054621 00 E S Notes...
Page 152: ...E Downloadable File Names E 2 SN0054621 00 E S Notes...
