Qlogic SANsurfer iSCSI HBA CLI, User Manual

Page: 94 / 184

5 – Non-Interactive Mode Commands
Non-interactive Commands
5-10 SN0054621-00 E
S
-dtdupd
(Duplicate a Persistent Target)
To duplicate a discovered target that is persistent, enter the
-dtdupd
command
as follows:
-dtdupd < hba_port_inst > < target_id >
A duplicate target is assigned a new iSCSI initiator ID (ISID) and can then be used
to create a redundant path.
For information on the interactive version of this command, “Duplicate a Persistent
Target” on page 4-46 .
-dtli
(Login and Persist a Discovered Target)
To log in a specific discovered target, enter the
-dtli
command as follows:
-dtli < hba_port_inst > < target_instance >
To obtain the target instance, use the command “-dtdsp (Display Discovered
Targets)” on page 5-9 .
For information on the interactive version of this command, “Login and Persist a
Discovered Target” on page 4-46 .
-dtlia
(Login and Persist a Discovered Target)
To log in all discovered targets, enter the
-dtlia
command as follows:
-dtlia < hba_port_inst >
For information on the interactive version of this command, “Login and Persist a
Discovered Target” on page 4-46 .
-dtrem
(Remove Discovered Target)
To remove a non-persistent discovered target, enter the
-dtrem
command as
follows:
-dtrem < hba_port_inst > < target_instance >
To obtain the target instance, use the command “-dtdsp (Display Discovered
Targets)” on page 5-9 .
For information on the interactive version of this command, “Remove Discovered
Target” on page 4-46 .