Qlogic SANsurfer iSCSI HBA CLI, User Manual

Page: 76 / 184

4 – Interactive Mode Commands
Port Level Info & Operations Menu
4-42 SN0054621-00 E
S
„ Name (CHAP name)
„ Secret (CHAP secret)
Assign a CHAP Entry to a Target
(CLI Option -linkchap)
To assign a CHAP entry to a target:
1. On the HBA CHAP Menu , type
3
( Assign a CHAP Entry to a Target ).
SANsurfer iSCSI HBA CLI lists available targets.
2. Type the target ID of the target you want, and then press
ENTER
.
The CHAP table is displayed.
3. At the prompt
CHAP Entry Number <0 for no CHAP>
, do one of the
following:
‰ Type the entry number for one of the entries in the displayed CHAP
table, and then press
ENTER
.
‰ Type
0
if you do not want to assign a CHAP entry to this target, and
then press
ENTER
.
Add a CHAP Entry
(CLI Option -addchap)
To add an entry to the CHAP table:
1. On the HBA CHAP Menu , type
4
( Add a CHAP entry ), and then press
ENTER
.
2. At the
CHAPName
prompt, type a name for the CHAP entry, and then press
ENTER
. The CHAP name can be up to 256 bytes long.
3. At the
CHAPSecret
prompt, type a secret for the CHAP entry, and then
press
ENTER
. The CHAP secret can be up to 100 bytes long.
4. The
CHAPBidi [off]
prompt displays. Do one of the following:
‰ If you want the HBA to authenticate the target (bidirectional CHAP),
type
yes
, and then press
ENTER
.
‰ If you do not want the HBA to authenticate the target, either press
ENTER
(the default) or type
off
, and then press
ENTER
. You can also
add a BIDI CHAP entry with the
-defbidi
command. See “-defbidi
(Add a Default BIDI CHAP)” on page 5-7 .
To view a map of targets to CHAP table entries, use the
-chapmap
command.
See “-chapmap (Display Targets Using CHAP Entries)” on page 5-6 .