Qlogic SANsurfer iSCSI HBA CLI, User Manual

Page: 46 / 184

4 – Interactive Mode Commands
HBA Level Info & Operations Menu (CLI Option -i)
4-12 SN0054621-00 E
S
HBA Level Info & Operations Menu
(CLI Option -i)
The HBA Level Info & Operations Menu provides the following options for each
HBA port instance:
1. HBA Information
(see page 4-12 )
2. HBA Options Menu
(see page 4-13 )
3. HBA Reset
(see page 4-14 )
4. HBA Diagnostic Menu
(see page 4-15 )
5. HBA Level Parameters Menu
(see page 4-17 )
6. Display VPD Information
(see page 4-18 )
7. Select HBA Port
(see page 4-49 )
8. Refresh
(see page 4-49 )
9. Exit
(see page 4-50 )
On each submenu, save the changes by typing the number for Save changes
and reset HBA , and then pressing
ENTER
. This saves your changes and resets
all ports on the HBA.
To update the firmware with these changes, type the number for Refresh , and
then press
ENTER
. If you do not select this option, your changes will not be visible
in SANsurfer iSCSI HBA CLI.
HBA Information
(CLI Option -ch)
When you select the HBA Information option, information is listed for the working
adapter; for example:
Board Type : QLE4060C
Chip Model : ISP4032
Chip Version : 0
Serial Number : QS40620A00034
MAC Address : 00-C0-DD-08-97-40
Driver Version : 2.1.4.18 (STOR w32)
Firmware Version : 3.0.1.45
ROM Version : 1.0.0.0
iSCSI Version : 0.20
BIOS/UEFI Version : 1.00
BIOS/UEFI Full Version : 1.00