Qlogic SANsurfer iSCSI HBA CLI, User Manual

Page: 140 / 184

D – Error Codes
Interactive Mode Error Codes
D-4 SN0054621-00 E
S
156 CORE_ERR_SECURITY_DESCRIPTOR
_INITIALIZATION_FAILED Security descriptor initialization failed.
157 CORE_ERR_UNABLE_SET_SECURITY
_DESCRIPTOR_DECL Unable to set security descriptor decl.
158 CORE_ERR_DRIVER_UPDATE_FAILED Driver update failed.
159 CORE_ERR_DEVICE_NOT_FOUND Device not found.
160 CORE_ERR_UNABLE_TO_BUILD_
ADAPTER_ID Unable to build adapter ID.
161 CORE_ERR_OPERATION_NOT_
SUPPORTED Operation not supported.
162 CORE_ERR_FAILURE_TO_INSTALL_
DRIVERS Failure to install driver.
163 CORE_ERR_UNEXPECTED_FILE_TYPE Unexpected input file type.
164 ERR_INVALID_CFG_PARAMETER Invalid configuration parameter.
165 CORE_ERR_GET_V6_CACHE Retrieval of IPv6 data failed.
166 CORE_ERR_GET_ARP_TABLE Retrieval of ARP table failed.
167 CORE_ERR_WRONG_FW_IMAGE Firmware image invalid for this HBA type.
168 CORE_ERR_NOT_SUPPORTED_FOR_
HBA Operation not supported by this HBA model.
169 CORE_ERR_USER_NOT_PRIVILEGED
_FOR_OPERATION User not privileged for this operation.
170 CORE_ERR_NO_APPROPRIATE_HBAS No appropriate HBAs for this firmware image.
171 — Reserved—not used.
172 CORE_ERR_NO_HBAS No HBAs detected.
173 CORE_ERR_NO_DRIVER_FOUND No driver found.
174 CORE_ERR_ISNS_NOT_SUPOORTED ISNS not supported.
175 CORE_UNKNOWN_ERR_MSG Error has no message in the catalog.
191 — Reserved—not used.
Table D-1. Interactive-Mode Error Code Descriptions (Continued)
Return Name Description