Qlogic SANsurfer iSCSI HBA CLI, User Manual

Page: 34 / 184

3 – Getting Started
Starting Non-interactive Mode
3-2 SN0054621-00 E
S
The Windows system displays the Main Menu . For example:
main Interactive Menu
-------------------------------------------------------
Program Version: 1.2.00.xx Driver Version: 2.1.x.x (STOR w32) IC: 1
Current HBA/Port Information: HBA Alias: qlogic
HBA: 0 Port: 0 HBA Port Index: 1 Model: QLA4050C
IP Address: 192.168.104.129
Link: Up
Port iSCSI Name: iqn.2000-04.com.qlogic:qla4050C.fs10506a02810.1
Port iSCSI Alias:
-------------------------------------------------------
1. Display Program Version Information
2. Host Level Info & Operations
3. HBA Level Info & Operations
4. Port Level Info & Operations
5. List All QLogic iSCSI HBA Ports detected
6. Help
7. Select HBA Port
8. Refresh
9. Exit
enter selection:
Depending on the menu selection, SANsurfer iSCSI HBA CLI prompts for more
input as needed.
For example, if you select Select HBA Port , SANsurfer iSCSI
HBA CLI lists the current HBAs and prompts you to select an HBA whose settings
you want to view or change.
Starting Non-interactive Mode
Type the following in a command window to start SANsurfer iSCSI HBA CLI in
non-interactive mode:
iscli < Parameters >
SANsurfer iSCSI HBA CLI executes the command options, and then terminates.
To list all of the available command line parameters, type the following:
iscli -h
All command line options must be preceded by the dash (–) notation. Most options
have a corresponding menu selection in interactive mode.