3–Fibre Channel Configuration
Configuring Boot Devices
46
BK3254601-00 C
Configuring Boot Devices with Noninteractive QConvergeConsole CLI
Configuring Boot Devices with the BIOS
Configuring Boot Devices with QConvergeConsole GUI
For information about configuring boot devices with QConvergeConsole GUI,
refer to the topics about HBA parameters, viewing or modifying port parameters,
and boot device selection in the
QConvergeConsole Help
.
Configuring Boot Devices with Interactive
QConvergeConsole CLI
On the
Fibre Channel Adapter Configuration
menu, select
Boot Devices
Configuration
to open the
Boot Device Settings
menu with options to view and
configure boot devices.
For information, refer to the section about the Fibre Channel interactive
commands in the
User’s Guide—QConvergeConsole CLI
(part number
SN0054667-00).
Configuring Boot Devices with Noninteractive
QConvergeConsole CLI
To set a specific target as the boot device for a specific adapter, issue the
following command:
#
qaucli -pr fc -e (<hba instance> | <hba wwpn>) <target wwnn>
<target wwpn> <target id> <lun id>
Where:
For more information, refer to the “Fibre Channel Noninteractive Commands”
section of the
User’s Guide—QConvergeConsole CLI
(part number
SN0054667-00).
Configuring Boot Devices with the BIOS
For information about boot device configuration with the
Fast!
UTIL BIOS utility,
refer to
“Using Fast!UTIL for Custom Configuration” on page 36
for information.
hba instance
= Adapter number (use the
-g
command to find)
hba wwpn
= Worldwide port name of the adapter
target wwnn
= Worldwide node name of the target
target wwpn
= Worldwide port name of the target
target id
= ID to which the target is bound
lun id
= ID of the LUN
